Configuration

Note When the DVR is in Panic Recording mode, it ignores time-lapse or event recording settings and follows the panic recording settings.

The maximum panic recording speed is 30 images per second (25 ips for PAL) when the resolution is set to Standard. However, when set to High, the recording speed decreases to 15 ips (12.5 ips for PAL).

When the DVR is recording video, a red dot appears on the screen. When the DVR is in Panic Recording mode, a white ! appears in the red dot and the REC LED on the front panel flickers.

5.You can set the DVR to record video based on time-lapse recording schedules

defined during time-lapse recording setup. Highlight the box beside Time-Lapse Recording and then press # to toggle between On and Off.

6.Highlight the box beside Auto Deletion. Press # . to toggle between On and Off.

When set to On, the DVR deletes video recorded earlier than the user-defined period. Highlight the second box beside Auto Deletion and then press # . to select the length of time recorded data will be kept, from 1 to 99 days.

Caution When the End of Disk is set to Stop, the DVR will NOT restart recording, even after video recorded earlier than the user-defined period is deleted.

7.To save your changes, highlight OK and then press # . Selecting Cancel exits the screen without saving the changes.

Rev 3.01

45

Document 900.0315

 

 

10/05

Page 63
Image 63
Honeywell HRHD 410 manual