Solutions
C
Solutions
This appendix provides solutions to common technical issues.
Problem | Possible solution |
|
|
No power | • Check power cord connections. |
| • Confirm that there is power at the outlet. |
|
|
No live video | • Check camera video cable and connections. |
| • Check monitor video cable and connections. |
| • Confirm that the camera has power. |
| • Check camera lens settings. |
| • Check CVBS(SVHS)/VGA switch settings. |
|
|
Live video extremely bright | If a cable is attached to the "Loop" connector, make |
| certain it is connected to a properly terminated |
| device. |
|
|
DVR stops recording | If the hard disk drive is full, you need to either delete |
| video or set the DVR to the Overwrite Mode. |
|
|
DVR displays an error | The DVR automatically resets the time and date of the |
message that the last recorded | unit, according to the time and date of the last |
image date and time is later | recorded image. |
than the current date and time | If this is not the correct time and date, reset the time |
setting of the DVR | and date manually. |
| |
| If the correct time and date is earlier than the last |
| recorded image, any video with a later time and date |
| will be lost when resetting the correct time and date. |
|
|
Rev 3.01 | 95 | Document 900.0315 |
|
| 10/05 |
