Configuration
The factory default LAN settings are:
IP Address | 192.168.1.129 |
Gateway | 192.168.1.254 |
Subnet Mask | 255.255.255.0 |
1.Highlight the box beside DNS Server and then press # .to enter the IP address of the DNS server. If you set the DNS Server, the domain name of the DVRNS server instead of the IP address can be used during the DVRNS Server setup. See DVRNS (DVR Name Service) Setup Screen, page 65 for detailed information on DVRNS Server setup.
2.Highlight Port Number Setup … and then press # .to display the Port Number Setup screen.
Figure 3-48 Port Number Setup Screen
Note Obtain the appropriate Port Number for each RAS related program (Admin, Watch, Search, and Callback) from your network administrator.
To change the number, highlight it and use the Up and Down arrow buttons to increase or decrease the number.
The factory default Port settings are:
Remote Admin: | 8200 |
Remote Watch: | 8016 |
Remote Search: | 10019 |
Remote Callback: | 8201 |
Rev 3.01 | 61 | Document 900.0315 |
|
| 10/05 |
