Honeywell HRHD 410 manual OSD On-Screen Display Setup

Configuration

Note For the Notify action to work, the DVR should be registered in the

RAS (Remote Administration System).

Display Setup

Highlight OSD or Main Monitoring in the Display menu, and then press # to set up the on-screen display or camera display on the main monitor.

OSD (On-Screen Display) Setup

Use the OSD Setup screen (MENU ➤ Display ➤ OSD) to set the DVR to display Date, Time, Title and Status on screen. Each feature can be turned on or off. You can also set up where you want the video to display on the screen by adjusting the margins.

Figure 3-44 OSD Setup Screen

1.Highlight the box beside Date and then press # to toggle the date display On and Off.

2.Highlight the box beside Time and then press # to toggle the time display On and Off.

3.Highlight the box beside Title and then press # to toggle the camera title display On and Off.

4.Highlight the box beside Status and then press # to toggle status display On and Off.

Rev 3.01	57	Document 900.0315
		10/05