Configuration
Alarm In Event Action (Alarm Out) Setup Screen
Use this screen to set how the DVR reacts to events differently by activating an internal buzzer or external alarms.
Figure 3-33 Alarm In Event Action (Alarm Out) Screen
1.Highlight the Sched box and then press # . A schedule screen displays. Set the schedule as described earlier.
2.Highlight the Alarm Out box and select either Beep and/or the alarm output terminal that you want to associate with the sensor.
3.Highlight the Dwell Time box and set the length of time you want the output activated.
Alarm In Event Action (Notify) Setup Screen
Use this screen to set the DVR to notify the remote site when certain events are activated.
Figure 3-34 Alarm In Event Action (Notify) Setup Screen
1.Highlight the Sched box and then press # . A schedule screen displays. Set the schedule as described earlier.
2.Highlight the Notify box and then press # . This toggles between On and Off.
Rev 3.01 | 50 | Document 900.0315 |
|
| 10/05 |
