Operation

3.Highlight the Load Query box and press # to load the saved Query settings.

4.Highlight the Save Query box and press # to save the current Query settings. Enter the title for the current Query option using the virtual keyboard.

5.Highlight the Clear Query box and press # to delete the current Query settings.

6.Highlight the Name box and enter the text to search using the virtual keyboard.

7.Highlight the Comp. box and enter the comparison operator using the virtual keyboard.

8.Highlight the Value box and enter the comparison value using the virtual keyboard.

Note The Column and Line can be used for more specific search of the text-in data. Column indicates the location of each individual category, and Line indicates the line where the category is located. Change the number of Column and Line by highlighting it and using the Up and Down arrow buttons to increase and decrease the number.

9.Enter AND or OR in the box under – heading for more specific text-in data search.

10.After you set your desired search conditions, highlight Start and then press # to display the search results in the Text-In Log screen. Select Close to exit this screen and return to the previous screen.

Rev 3.01

88

Document 900.0315

 

 

10/05

Page 106
Image 106
Honeywell HRHD 410 manual