Heat Controller RAH-123G owner manual Heat Controller, Inc, Room Air Heat Pump with R-410A

Heat Controller, Inc. Room Air Heat Pump with R-410A Owner’s Manual

4.Use a ³⁄₁₆" drill bit to drill 3 starter holes 1/2" deep through the 3 holes in the cabinet and into the windowsill.

5.Attach cabinet to windowsill with 3 - #10 x 1/2" pan-head Phillips screws.

B

A A

A. #10 x 1/2" pan-head Phillips screws

B.Windowsill

6.Check that air conditioner cabinet is tilted 1/2 bubble on carpenters level to the outside so that water will run to the outside.

Attach Side Curtains to Window Frame

1.Pull left-hand curtain out until it fits into window channel. Use a ³⁄₃₂" drill bit to drill a starter hole through the hole in the curtain housing and into the lower window sash.

Front View

Top View

B

A

C

A.Left-hand curtain

B.Window channel

C.#10 x ³⁄₄" round-head screw

2.Insert one of the #10 x ³⁄₄" round-head screws through hole and into lower window sash. Insert one of the

#10 x ³⁄₄" round-head screws through threaded hole in top of curtain and one in bottom of curtain.

A

B

A. #10 x ³⁄₄" round-head screw

B. Hole for #10 x ³⁄₄" round-head screw

3.Repeat for right-hand curtain.

Complete Window Installation

1.Insert foam seal behind the top of the lower window sash and against the glass of the upper window.

2.Place window-lock bracket on top of lower window and against upper window sash.

3.Use a ³⁄₃₂" drill bit to drill a starter hole through the hole in the bracket and into the window sash.

4.Attach window-lock bracket to window sash with

#10 x ³⁄₄" round-head screw to secure window in place.

B

A C

	d
	d
A. Window lock bracket(2)	C. Upper window glass
B. Foam seal	D. #10 x 1/2" pan-head Phillips screws (3)

10