
Configuration
Note The following description is for a Generic Text device. The screen changes for different types of text input devices and there will be different parameter boxes for you to enter information.
Figure 3-22 Text-In (Generic Text) Setup Screen
4.Highlight the box beside Transaction Start and then press # . A virtual keyboard (see Figure
5.If you want the DVR to react to any character sent from the text input device, turn on Any Character. To do this, highlight Any Character and then press # to toggle between On and Off.
Note If Any Character is turned On, you will not be able to enter any text in the Start String box.
6.Highlight the box beside Transaction End and then press # to display the virtual keyboard. Enter the transaction end string. Refer to the device manufacturer’s documentation for the text string that the device sends when a transaction ends.
7.Highlight the more line(s)# box and then press # . Select the number of additional lines of text that you want the DVR to record, between 0 and 10.
8.Highlight the box beside Keyword2 and press # to display the virtual keyboard. Enter the second key word for transaction field detection.
9.Highlight the box beside Line Delimiter and press # . In the virtual keyboard, enter the character(s) that the device uses to indicate the end of a line. Control characters can be created using ^and a capital letter (for example, ^J for NL [New Line], ^M for CR [Carriage Return]). Refer to the device manufacturer’s documentation for Line Delimiter character(s).
Rev 3.01 | 38 | Document 900.0315 |
|
| 10/05 |