
Configuration
Network Setup Screen
Use the Network Setup screen (MENU ➤ Network ➤ Network Setup) to set up the DVR for LAN and modem connections.
Figure 3-46 Network Setup Screen
1.Highlight the box beside Connection. Press # to toggle between LAN and Modem.
2.Highlight the box beside Admin Password and then press # . A virtual keyboard displays (see Figure
3.Highlight the box beside User Password and then press # . A virtual keyboard displays. You will first be asked to enter the current password. Then you can enter a new password; you will be asked to confirm the new password before it is accepted.
Note These passwords are for network use only. They are different from the Admin and User passwords for the DVR itself.
The passwords are case sensitive. The factory default password for both Administrator and User is 12345678.
Caution Write the password down and keep it in a safe place. After the password has been reset, the default will no longer work. If the password is forgotten, the unit must be reset using the Factory Reset Button and all data settings will be lost.
Rev 3.01 | 59 | Document 900.0315 |
|
| 10/05 |