Configuration

Clip Copy

Use the Clip Copy screen to copy video to an internal CD-RW drive, or external USB hard disk drive, or USB flash drive. The copied clip images can be viewed on computers running Microsoft Windows 98, ME, 2000 or XP. Refer to Appendix A, USB Hard Disk Drive Preparation for information on preparing the external drive for back up.

Highlight Clip Copy (MENU Config Clip Copy) and then press # . The Clip Copy screen displays.

Figure 3-57 Clip Copy Screen

1.To select the type of drive to use for back up, highlight the box on the top and then press # . A drop-down list of available drives displays. You can select from IDE CD-RW, USB Flash Memory, USB HDD, or USB CD-RW.

2.Place a check mark in the Audio box to archive recorded audio with video.

3.You can define how much video to copy by changing the start and end times and dates. You can also select which camera you wish to back up.

4.Highlight the File Name box and then press # . A virtual keyboard displays (see Figure 3-7). Enter a file name for the video you are copying and select Close. The DVR automatically adds the camera number (for example, 01) and .exe to the file name. If you want to save the file in a specific folder, enter the folder name followed by a / (for example, folder/filename).

5.After you have given the video a file name, highlight the Start button and then press # . The DVR displays the drive capacity, the backup file size, and asks if you want to continue.

When the selected drive has more than two partitions, the following Disk Partition Selection screen displays. If the file system is not FAT32, the Type displays Not Supported.

Rev 3.01

72

Document 900.0315

 

 

10/05

Page 90
Image 90
Honeywell HRHD 410 manual Clip Copy Screen