Configuration
Password Setup Screen
An Administrator password is required to:
•Turn the system off
•Enter the setup screen
•Load default setups
•Clear all data
•Change system date and time
•Change the Administrator password
A User password is required to:
•Enter playback, fast forward playback and fast backward playback modes from Live Monitoring mode.
•Enter the search menu screen in Live Monitoring mode.
Highlight Password in the Main Menu (MENU ➤ Password) and then press # to display the Password screen.
Figure 3-55 Password Setup Screen
1.Highlight the box beside User and then press # to toggle between On and Off.
If the password is set to On, you will be asked to enter the current password so that you can turn it off.
If the password is set to Off, you will be asked to enter the new password and to confirm it before it will be turned on.
2.The Administrator password cannot be turned On and Off. You can change the Administrator password by first entering the current password, entering a new password, and then confirming the new password.
To change the password, highlight the box below Password, and then press # . A window displays asking you to enter the current password. If you enter the correct
password, another window displays asking you to enter a new password using the camera buttons. After you press # , another screen displays asking you to confirm the new password.
Rev 3.01 | 70 | Document 900.0315 |
|
| 10/05 |
