Operation
Note You cannot enter PTZ mode when the DVR detects video loss on the selected camera or the camera is turned off or set up as Covert 1 or Covert 2.
Press MENU in PTZ mode to display the PTZ Mode screen.
Figure 4-3 PTZ Menu Screen
•Press Set Preset to configure the presets for PTZ cameras.
•Press Set Speed to set the pan and tilt speed for PTZ cameras.
•Press Quit to close the menu.
Setting PTZ Presets
After you have the camera at the desired installation settings, you can save camera position settings as Presets so that you can go directly to desired views.
1.Select Set Preset in the PTZ Menu.
2.Select the number you want to assign to the preset, and then press # . Use the Virtual Keyboard to enter the preset name.
3.Press # to save the preset.
Figure 4-4 PTZ Preset Screen
Preset View
After you have set the camera presets, you can go directly to the desired views.
1.Press QUAD/SEQ to load the Preset View dialog box.
2.Select the desired preset number to load the preset.
Rev 3.01 | 78 | Document 900.0315 |
|
| 10/05 |
