Configuration

Storage Screen

Highlight Storage in the Main Menu (MENU System Storage) and then press

#. The Storage setup screen displays.

Figure 3-12 Storage Screen

The Type field displays the type and capacity of storage devices.

The Status field displays the device status or fault conditions. Options are:

Good

Disk Bad

S.M.A.R.T.

Alert

High Temperature

Not installed

Note If the DVR senses S.M.A.R.T (Self-Monitoring, Analysis and Reporting Technology), Alert, or High Temperature, the S.M.A.R.T. Monitoring Information screen displays. When this happens, we recommend that you replace the hard disk drive, usually within 24 hours.

The S.M.A.R.T. Monitoring Information screen only displays in

Live Monitoring mode.

The °C field displays the temperature of the storage device.

The Usage field displays the device usage. You can set the DVR to react to storage problems by activating an internal buzzer or external alarms, display a warning message and/or notifying a PC running RAS (Remote Administration System).

1.Highlight the box beside the Storage Problem Action: Alarm Out/Notify and then press # . You can select Beep, the External Alarm Out Terminal you want to associate with the storage problem event, and/or Notify.

Rev 3.01

30

Document 900.0315

 

 

10/05

Page 48
Image 48
Honeywell HRHD 410 manual Storage Screen