Configuration

Note When you select Covert 1, the DVR displays the camera title and status icons on the covert video. When you select Covert 2, the DVR displays only camera title on the covert video.

2.To assign titles to each camera, highlight the camera title under the Title heading and then press # . A virtual keyboard (see Figure 3-7) allows you to enter camera names.

3.Selecting the PTZ Device box causes a list of controllable cameras to display. Select your camera from the list and then press # . You must connect the camera to the RS485 terminal on the back of the DVR following the camera manufacturer's instructions.

Figure 3-17 PTZ Device List

4.To assign IDs to each camera, highlight the ID heading and then press # . To change the number, highlight it and use the Up and Down Arrow buttons to increase and decrease the numbers. The camera ID number can be set from 0 to 256.

Rev 3.01

34

Document 900.0315

 

 

10/05

Page 52
Image 52
Honeywell HRHD 410 manual PTZ Device List