Honeywell HRHD 410 manual Connecting to the Network Port, Connecting to the RS232C Port

Installation

Note For RGB Monitor output, set the CVBS (SVHS) VGA selector switch to VGA (see Figure 2-5).

Connecting to the Network Port

Figure 2-8 Network Connector

N E T W O R K

The DVR can be networked using the 10/100Mb Ethernet connector. Connect a CAT5 cable with an RJ45 jack to the DVR connector. The DVR can be networked with a computer for remote monitoring, searching, configuration, and software upgrades. See Chapter 3, Configuration for configuring the Ethernet connections.

Connecting to the RS232C Port

Figure 2-9 RS232C Connector

RS- 232C

Use the RS232C port to connect an external modem for remote monitoring, configuration, and software upgrades, text input, and to connect a remote control keyboard. Use a modem cable with a DV9S (female) connector to connect to the DVR.

The DVR can be networked using the 10/100Mb Ethernet connector. Connect a CAT5 cable with an RJ45 jack to the DVR connector. The DVR can be networked with a computer for remote monitoring, searching, configuration, and software upgrades. See Chapter 3, Configuration for configuring the Ethernet connections.

Rev 3.01	10	Document 900.0315
		10/05