Settings

6.Repeat Steps 4 and 5 until you have filled in all parameters.✎You can get the network parameter values from your Internet provider.

7.When finished entering all the parameter values, select OK, and then press the OK button. The home cinema verifies the network connection and then connects to the network.

Wireless NetworkYou can set up a wireless network connection in three ways:-Wireless Automatic-Wireless Manual-WPS(PBC)

Before you configure the wireless network connection, disconnect any wireless network devices currently connected to the product or, if applicable, the product's current wired connection.

❑Wireless - Automatic

After following Steps 1 to 3 in "Configuring Your Network Connection" on page 23:

1.In the Network Settings screen, change Network type to Wireless. The product searches for and then displays a list of the available networks.

4.When finished, select Done, and then press the OK button. The product verifies the network connection and then connects to the network.

✎You should be able to find the security code or pass phrase on one of the set up screens you used to set up your router or modem.

❑Wireless - Manual

If you have a static IP address or the Automatic procedure does not work, you'll need to set the Network Settings values manually.

After following Steps 1 to 3 in "Configuring Your Network Connection" on page 23:

1.

In the Network Settings screen, change

 

Network type to Wireless. The product

 

searches for and then displays a list of the

2.

available networks.

Scroll through the list, select the desired network

3.

or Add Network, and then press the OK button.

If you selected a network in Step 2, go to Step 6.

4.

If you selected Add Network, go to Step 4.

Enter your wireless network or wireless router's

 

name.

 

~

Enter letters by selecting a letter with the

 

 

78:;buttons, and then pressing the OK

 

 

button.

 

~

To display capital letters (or redisplay lower

 

 

case letters if capital letters are displayed),

Network Settings

Select your network type.

Network type

Wireless

Wireless network

si-ap

iptime

KIMING_VTOWER

You can connect your Blu- ray player to the internet. Please select which wireless network to use.

select , and then press the OK button.

~ To display symbols and punctuation, select

123#&, and then press the OK button. To

redisplay letters, select 123#&, and then press

the OK button.
When finished, select Done, and then press the OK button.

5. On the Security type screen that appears,

use the ,. buttons to select the network's

Refresh WPS(PBC)

2.Select the desired network, and then press the OK button.3.On the Security screen, enter your network's security code or pass phrase.

Enter letters by selecting a letter with 78:; buttons, and then pressing OK button.

Security type, and then press the OK button.

On the next screen, enter your network's
security code or pass phrase.

~ Enter letters by selecting a letter with the

78:;buttons, and then pressing the OK

button.

When finished, select Done, and then press the OK button. The product searches for the network.

24 - English