Honeywell HRHD 410 Text-In Event Action Record Setup Screen, Text-In Event Action Record Screen

Configuration

2.Highlight the Notify box and then press # . This toggles between On and Off. When it is On, the DVR notifies the remote site when certain events occur based on a defined schedule.

Note For the Notify action to work, the DVR should be registered in the

RAS (Remote Administration System).

Text-In Event Action (Record) Setup Screen

Use this screen to set how the DVR reacts to text input from the text-in device. You can assign the text-in a schedule, associated camera, recording speed, video quality, and dwell time.

Figure 3-38 Text-In Event Action (Record) Screen

1.Highlight the Sched box and then press # . A schedule screen displays. Set the schedule as described earlier.

2.Highlight the Camera box and then press # . A camera selection screen displays. Select the camera number you would like to associate with the text-in device.

Note You cannot associate multiple cameras with a text-in device.

3.Highlight the Speed box and select the number of images per second you would like to record from the drop-down list.

4.Highlight the Quality box and select the image quality you want to record from the drop-down list.

5.Highlight the Dwell Time box and then set the length of time you would like to record for the text input.

Rev 3.01	53	Document 900.0315
		10/05