
Configuration
4.The Transfer Speed indicates the image rate transferred to each RAS. Highlight the box beside Transfer Speed, press # then adjust the number.
Note The maximum transfer speed over a LAN is 30 images per second (25 ips for PAL) when the resolution is set to Standard. However, when set to High the transfer speed will decrease to 15 images per second (12.5 ips for PAL).
5.You can program the image quality for transferring to RAS. Highlight the box beside Remote Quality and then press # . You can set the image quality to Very High, High, Standard, or Low.
LAN Setup Screen
Use the LAN Setup screen to configure your Local Area Network.
Figure 3-47 LAN Setup Screen
Highlight the box beside Type and then press # .to select from Manual, DHCP, and ADSL (PPPoE).
Selecting Manual from Type allows you to set up LAN parameters manually.
LAN Setup — Manual
| Note | Obtain the appropriate IP Address, Gateway and Subnet Mask | |
|
| from your network administrator. |
|
|
| ||
Change the numbers by highlighting them and using the Up and Down Arrow buttons | |||
or the Jog Dial to increase or decrease the numbers. |
| ||
|
|
|
|
Rev 3.01 | 60 | Document 900.0315 | |
|
|
| 10/05 |