Configuration

Figure 3-58 Disk Partition Selection Screen

After you select the drive and partition to use for clip copy, the DVR displays the drive capacity, the clip size, and asks if you want to continue.

Note We recommend that you do not copy files larger than 2 GB.

You can use other functions on the DVR while video is being backed up. To do this, highlight Close and then press # . You can return to the Clip Copy screen at any time to check the progress.

Note You can not end the clip copy process during CD burning.

Refer to the Remote Administration System (RAS) User Guide for instructions on how to review the images you have copied.

Note During clip copy, you cannot change the system date and time, shut the system down, switch to the Quick Setup mode, clear all data, or change the system setup from a remote site.

Note The recording speed decreases to 1 ips per camera during CD burning or while the DVR is preparing clip copy data on the hard disk drive.

Rev 3.01

73

Document 900.0315

 

 

10/05

Page 91
Image 91
Honeywell HRHD 410 manual Disk Partition Selection Screen