AT&T 1412 user manual Wall Installation

1412 2002.12.7 9:20 AM Page 6

Wall Installation

1Reverse the wedge under the base. Place your fingers in the holes as shown and swing the top of the wedge down.

2Connect the power cord and place the cord as shown.

Use only the power cord supplied with this product. If you need a replacement, call 1 800 222–3111.

3Connect the telephone line cord(s).

If you have a two-line jack, use only the four-wire (RJ-14) line cord. Connect the line cord from the wall jack to the jack labeled L1/L1+L2 on the base. Make sure the plugs snap firmly into place.

Standard	L1/L1+L2 Jack
	Line 1/Line 2
electrical	Modular
outlet	telephone jack

6