Technical Specifications | AT&T 1412 manual

1412 2002.12.7 9:21 AM Page 57

TECHNICAL SPECIFICATIONS

TECHNICAL SPECIFICATIONS

Frequency Control	Crystal controlled
	PLL synthesizer

Transmit Frequency
Handset	912.75 –917.10 MHz
Base	2411.15 – 2418.40 MHz

Receive Frequency
Handset	2411.15 – 2418.40 MHz
Base	912.75 – 917.10 MHz

Channels	30 Channels

Normal Effective Range Maximum power allowed by FCC and IC.

	Actual operating range may vary according
	to environmental conditions at the time
	of use.

Size
Handset	193mm x 60mm x 40.5mm
(including antenna)
Base	193.4mm x 172.4mm x 76.8mm
(including antenna)

Weight
Handset	159 grams
Base	536 grams
(excluding battery pack)

Power Requirements
Handset	3.6V 600mAh Ni-Cd Battery Pack
Base	9V DC @ 500mA

Memory
Base Speed Dial	10 Memory locations
	24 digits per location

SPECIFICATIONS ARE TYPICAL AND MAY CHANGE WITHOUT NOTICE.

57

Image 60

AT&T 1412 user manual Technical Specifications

Contents

Caller ID/Call Waiting on Handset Part 1 Important Product Information 1412 2002.12.7 920 AM Contents Parts List Before YOU Begin About Caller Identification Caller ID About Call History Installation Before You InstallInstall the handset battery Table/Desk Installation Connect the power cordConnect the telephone line cords Charge the handset battery Check for dial toneTurn base ringers on or off Wall Installation Follow Steps 3 5 in Table/Desk Installation Mount base on wall Belt Clip Headset Data Port Feature Setup Feature Setup Menu Set Line 1 Ringer Set Line 2 Ringer Set Voice Messages Indicators Set Time Set Date Set Dial Mode Telephone Operation Idle ScreenMake a Call Answer a Call Volume Redial Erase a Number from Handset Redial Memory Flash/Call Waiting Mute To return to two-way conversation Temporary Tone Dialing Handset Locator Display Screen Messages Handset only Handset Lights Intercom Operation At the Handset At the Base Make an Intercom Call While on a Phone Call Conference Calls Three-Way Conference Call Four-Way Conference Call End a Conference Call Place a Conference Call on Hold Speak Privately with One Party Switch a Conference Call Between Handset and Base Switch from Handset to Base Directory Store a Number and Name in the Directory 1412 2002.12.7 920 AM Store a Number from Handset Redial in the Directory 1412 2002.12.7 920 AM Keypad Characters Dial a Number in the Directory Edit a Number/Name in the Directory Delete a Directory Entry Turn Distinctive Ring On/Off Base Memory Store a Number in Base Memory Dial a Base Memory Number Caller ID Operation Review Call History Remove a Call Record Store a Call Record in the Directory Display Dial Dialing Options For example The number is 908 555 Battery Life Charge the Handset Battery PackBatteries Replace the Handset Battery Pack If you hear a long tone when you try to use the handset Case of DifficultyIf the phone does not work at all, check these items first If you hear noise or interference when using the phone If you hear other calls while using your phone If the phone does not ring when you receive a call If you lose a call after changing channelsIf your telephone Misdials Caller ID If the caller’s name or phone number is not displayed Default Settings Default Settings Technical Specifications Index OLD