Installation, Before You Install | AT&T 1412 instruction

1412 2002.12.7 9:20 AM Page 3

INSTALLATION

Before You Install

1Choose a location for the base near an electrical outlet and a telephone jack.

This phone requires a modular telephone jack and a standard electrical outlet (110v AC) not controlled by a wall switch.

¥NOTE: Install the base unit away from electronic equipment, such as personal computers, television sets or microwave ovens. Avoid excessive heat, cold, dust or moisture.

2Install the handset battery.

Use only AT&T Battery 3301:SKU #91076.

a) Remove battery	b) Align two
compartment	holes in plug
cover by	with socket
pressing on	pins, and snap
the indentation	the plug into
and sliding	place.
downward.

c) Place battery pack in	d) Replace
compartment with the	cover by
wires in the lower left	sliding it up
corner, along the	into place.
bottom of the battery
pack.

3

Image 6

AT&T 1412 user manual Installation, Before You Install, Install the handset battery

Contents

Caller ID/Call Waiting on Handset Part 1 Important Product Information 1412 2002.12.7 920 AM Contents Parts List Before YOU Begin About Caller Identification Caller ID About Call History Installation Before You InstallInstall the handset battery Table/Desk Installation Connect the power cordConnect the telephone line cords Charge the handset battery Check for dial toneTurn base ringers on or off Wall Installation Follow Steps 3 5 in Table/Desk Installation Mount base on wall Belt Clip Headset Data Port Feature Setup Feature Setup Menu Set Line 1 Ringer Set Line 2 Ringer Set Voice Messages Indicators Set Time Set Date Set Dial Mode Telephone Operation Idle ScreenMake a Call Answer a Call Volume Redial Erase a Number from Handset Redial Memory Flash/Call Waiting Mute To return to two-way conversation Temporary Tone Dialing Handset Locator Display Screen Messages Handset only Handset Lights Intercom Operation At the Handset At the Base Make an Intercom Call While on a Phone Call Conference Calls Three-Way Conference Call Four-Way Conference Call End a Conference Call Place a Conference Call on Hold Speak Privately with One Party Switch a Conference Call Between Handset and Base Switch from Handset to Base Directory Store a Number and Name in the Directory 1412 2002.12.7 920 AM Store a Number from Handset Redial in the Directory 1412 2002.12.7 920 AM Keypad Characters Dial a Number in the Directory Edit a Number/Name in the Directory Delete a Directory Entry Turn Distinctive Ring On/Off Base Memory Store a Number in Base Memory Dial a Base Memory Number Caller ID Operation Review Call History Remove a Call Record Store a Call Record in the Directory Display Dial Dialing Options For example The number is 908 555 Battery Life Charge the Handset Battery PackBatteries Replace the Handset Battery Pack If you hear a long tone when you try to use the handset Case of DifficultyIf the phone does not work at all, check these items first If you hear noise or interference when using the phone If you hear other calls while using your phone If your telephone If the phone does not ring when you receive a callIf you lose a call after changing channels Misdials Caller ID If the caller’s name or phone number is not displayed Default Settings Default Settings Technical Specifications Index OLD