SOYO SY-KT333 Memory Configuration Table

Step 3. Configure Memory

Your board comes with three DIMM sockets, providing support for up to 3GB of main memory using

unbuffered and non-ECC DIMM modules from 64MB to 1GB. On this motherboard, DRAM speed can

be set independent from the CPU front side bus speed. Depending on the DRAM clock speed setting in

the BIOS setup, appropriate memory modules must be used. For 100MHz DRAM speed, use

PC1600 memory; for 133MHz DRAM speed, use PC2100 memory; for 166 MHz DRAM speed, use

PC2700 memory.

Memory Configuration Table

Number of Memory

Modules DIMM 1 DIMM 2 DIMM 3

RAM Type DDR RAM

Memory Module Size

(MB) 64 / 128 / 256 / 512 / 1024 MB

Step 4 Install Expansion Card

The motherboard has 1 AGP PRO slot and 5 PCI slots.

1. Read the related expansion card’s instruction document before inserting the expansion card into

the computer.

2. Press the expansion card firmly into expansion slot in motherboard.

3. Be sure the metal contacts on the card are indeed seated in the slot.

4. Replace the screw to secure the slot bracket of the expansion card.

5. Install related driver from the operating system.

Step 5 Connections to the Motherboard

This section tells how to connect internal peripherals and the power supply to the motherboard.

The internal peripherals consist of IDE devices (HDD, CD-ROM), Floppy Disk Drive, Chassis Fan, Front

Panel Devices (Internal Speaker, Reset Button and IDE LED Switch.), Wake-On-LAN card, VGA card,

Sound Card, and other devices.

For more details on connecting internal and external peripherals to your new SY-KT333 DRAGON Lite

motherboard, please refer to SY-KT333 DRAGON Lite motherboard User's Manual and Technical

Reference online manual on the CD-ROM.