SOYO SY-KT333 quick start Cmos Clear JP5, Audio Speakers connections

Installation

SY-KT333 DRAGON Lite Quick Start Guide

CMOS Clear (JP5)

In some cases the CMOS memory may contain wrong data, follow the steps below to clear the CMOS memory.

1.Put the jumper back to 1-2 to allow writing of new data into the CMOS memory.

2.Clear the CMOS memory by momentarily shorting pin 2-3 on jumper JP5.This jumper can be easily identified by its white cap.

CMOSClearing	Retain CMOS Data			ClearCMOSData
JP5Setting	Shortpin1-2toretain			Shortpin2-3for
				atleast5secondsto
	newsettings
				cleartheCMOS
	1	2	3		2	3
				1

Note:You must unplug theATX power cable from theATX power connector when performing the CMOS Clear operation.

Audio Speakers connections

When using 2 channel speaker, connect the speaker cable to line-out.

If you’re using 4 channel speaker, connect the front L/R speakers to line-out and rear L/R speakers to Line-in. make sure to set the audio software for 4 channel speaker system.

Line-out Line-in

14