If you hear noise or interference when using the phone | AT&T 1412

1412 2002.12.7 9:20 AM Page 53

PHONE

PROBLEM	SOLUTION
To re-initialize the	1	Disconnect the power to the base.
handset and base:	2	Remove the handset battery pack.
	3	Wait at least 15 seconds.
	4	Insert the handset battery pack.
	5	Connect the power to the base.

PROBLEM	SOLUTION

If you hear noise or interference when using the phone:

•You may be out of range. Move closer to the base.

•Press or until the screen displays

, then press . If noise is exceptionally loud,move closer to the base before changing channels.

•Household appliances plugged into the same circuit as the base can sometimes cause interference. Try moving the appliance or the base to another outlet.

•The layout of your home or office may be limiting the operating range. Try moving the base to another location, preferably on an upper floor.

•Using the handset near household appliances (microwaves,computers, televisions,stereos,etc.) can sometimes cause interference. Move away from appliances while using the handset.

PROBLEMSOLUTION

If you hear other calls while using your phone:

•Press or until the screen displays

, then press .

•Disconnect the base from the modular jack and plug in a corded telephone. If you still hear other calls, the problem is probably in your wiring or local service.

Call your local telephone service company.

53

Image 56

AT&T 1412 If you hear noise or interference when using the phone, If you hear other calls while using your phone

Contents

Caller ID/Call Waiting on Handset Part 1 Important Product Information 1412 2002.12.7 920 AM Contents Parts List Before YOU Begin About Caller Identification Caller ID About Call History Install the handset battery InstallationBefore You Install Connect the telephone line cords Table/Desk InstallationConnect the power cord Turn base ringers on or off Charge the handset batteryCheck for dial tone Wall Installation Follow Steps 3 5 in Table/Desk Installation Mount base on wall Belt Clip Headset Data Port Feature Setup Feature Setup Menu Set Line 1 Ringer Set Line 2 Ringer Set Voice Messages Indicators Set Time Set Date Set Dial Mode Make a Call Telephone OperationIdle Screen Answer a Call Volume Redial Erase a Number from Handset Redial Memory Flash/Call Waiting Mute To return to two-way conversation Temporary Tone Dialing Handset Locator Display Screen Messages Handset only Handset Lights Intercom Operation At the Handset At the Base Make an Intercom Call While on a Phone Call Conference Calls Three-Way Conference Call Four-Way Conference Call End a Conference Call Place a Conference Call on Hold Speak Privately with One Party Switch a Conference Call Between Handset and Base Switch from Handset to Base Directory Store a Number and Name in the Directory 1412 2002.12.7 920 AM Store a Number from Handset Redial in the Directory 1412 2002.12.7 920 AM Keypad Characters Dial a Number in the Directory Edit a Number/Name in the Directory Delete a Directory Entry Turn Distinctive Ring On/Off Base Memory Store a Number in Base Memory Dial a Base Memory Number Caller ID Operation Review Call History Remove a Call Record Store a Call Record in the Directory Display Dial Dialing Options For example The number is 908 555 Batteries Battery LifeCharge the Handset Battery Pack Replace the Handset Battery Pack If the phone does not work at all, check these items first If you hear a long tone when you try to use the handsetCase of Difficulty If you hear noise or interference when using the phone If you hear other calls while using your phone If the phone does not ring when you receive a call If you lose a call after changing channelsIf your telephone Misdials Caller ID If the caller’s name or phone number is not displayed Default Settings Default Settings Technical Specifications Index OLD