Step 3: Install AGP Card
1 . Read the relateAGP card's instruction document before install the AGP card into the computer.
2 . If your AGP card has "AGP 4X(1.5V) notch" (show below), please make sure your AGP card is AGP 4X(1.5V).
3 . Please carefully pull out the small white- drawable bar at the end of the AGP slot when you try to install/ Uninstall the AGP card. Please align the AGP card to the onboard AGP slot and press firm ly down on the slot .M ake sure your AGP card is locked by the sm all white- drawable bar.
Step 4: Install I/O Peripherals Cables
Step 4-1: I/O Back Panel Introduction
u | v |
| z * |
|
| ||
| w | x y | } |
|
|
| { |
|
|
| ~ |
uPS/2 Keyboard and PS/2 Mouse connector
This connector supports standard PS/2 keyboard and PS/2 m ouse.
vParallel port (LPT)
Device like printer can be connected to Parallel port.
wSerial port (COMA)
Mouse and modem etc. can be connected to Serial port.
xVGA port
Monitor can be connected to VGA port.
y/{ USB port
Before you connect your device(s) into USB connector(s), please make sure your device(s) such as USB keyboard, mouse, scanner, zip, speaker...etc. Have a standard USB interface. Also m ake sure your OS supports USB controller. If your OS does not support USB controller, please contact OS vendor for possible patch or driver upgrade. For more information please contact your OS or device(s) vendors.
"*" For
English
- 11 - | Hardware Installation Process |
