3.Plug the power cord of each device to be monitored into one of the receptacles on the back panel of the PCS4.

4.If desired, connect a relay-controllable siren or other detection device to the Alarm relay on the rear panel.

NOTE: The alarm relay cannot be set up from the front panel. You must use either

SIS commands or the web pages to configure it (see the Power receptacle

Monitoring and Alarm Functions SIS commands in the “SIS Programming and Control” section).

IPL T PCS4 • Installation and Rear Panel

7

Page 13
Image 13
Extron electronic IPL T PCS4i manual IPL T PCS4 Installation and Rear Panel