1.Overview – Technical Description
The ENTERPRISE120 is an azimuth over elevation positioning mount with motorised polarisation control.
All axis feature simple and very robust 24V DC motor drives giving reliable, low backlash, high and low speed motion controlled by either a jog controller or a fully
The optical layout is a dual offset Gregorian antenna which naturally produces cross polarisation patterns which easily meet the
The bearings are sealed for life items that allow for highly accurate motion but require no maintenance.
A manual over ride is provided for both azimuth and elevation axis to enable stowing the antenna due to power or other failure.
The RF power amplifier(s) can be fitted either directly onto the feed of securely fitted to the boom arm.
System weight (without the RF) is 80 kg.
2.Installation and Set-up
The ENTERPRISE120 is fully tested with the controller prior to shipment. All position feedback, limit switches and motor speeds have been calibrated or set at the factory and require no adjustment.
Remove the lid and end sections of the shipping crate, adjust forklift forks to roughly 1m apart or as wide as they will safely go if this cannot be achieved.
Once suitable brackets are available (see attached drawing) these should be fitted to the antenna roughly in the positions shown on the interface drawing with the slide nuts provided.
Slings or ropes capable of withstanding the weight of the antenna (80kg) should then be attached to the brackets, looped over the forks of the forklift and clamped onto the forks to prevent them slipping off.
Raise the antenna to clear the vehicle roof by a minimum of 0.5m and manoeuvre to the rear of the vehicle.
Whilst ensuring all cables are clear of mounting points, lower the positioner onto the vehicle roof and line up all mounting holes.
ENTERPRISE120 | UK Office Phone | +44 1480 357 600 | ♦ Fax +44 1480 357 601 | Page 3 of 14 | |
| US Office Phone | +1 480 839 4136 | ♦ Fax +1 480 839 0860 | Website: www.AdvantechWireless.com |
|
| Canada Office Phone +1 514 420 0045 ♦ Fax +1 514 420 0073 |
|
| ||
Ref:
