ENTERPRISE120
UK Office Phone +44 1480 357 600
Fax +44 1480 357 601
US Office Phone +1 480 839 4136
Fax +1 480 839 0860
Canada Office Phone +1 514 420 0045
Fax +1 514 420 0073
E-mail Sales.UK@AdvantechWireless.com
Website: www.AdvantechWireless.com
Page 6 of 14
Ref: PM-ENT120-002-11022
Note that if the UIU is to be used for selecting the Reference and Target satellites, then
those satellites must appear in the first 10 slots of satellite data Ensure that the reference
and target satellites are as required and that the final Pol and final LNB settings match the
settings required to access the satellite after acquisition.
Command Deploy (from the UIU or GUI).
For manual or JOG functions
Accessing JOG ANTENNA puts the system into manual jog mode and the Az and El axes
can be jogged using the ^, v,> and < keys. Pressing enter again will toggle the mode
between (Az & El jog) and (Polarisation axis jog (using > and < keys)). If the enter key is
pressed while a ^, v, > or < key is already active then the speed will change to fast.
This is not a latching function and the speed will revert to slow as soon as the enter key is
released. Clear will take the system back out of Jog mode.
4. Maintenance
The antenna should be fully visually inspected at the point of installation and periodically
there after at intervals of not more than 1 year. As the drives require no maintenance or
adjustment this procedure simply involves ensuring there are no worn or damaged
cables, that the waveguide is not damaged or perished and that all fasteners are present
and tightened to the correct torque level.
5. Spares and Replacement Parts
Since no maintenance is required, only electrical parts are recommended as spares.
These parts will not fail from activity, but may fail from environmental exposure.