4.IP, gateway, and subnet mask addresses follow standard naming and numbering conventions and protocol (nnn.nnn.nnn.nnn). The IP network administrator should provide the addresses to be used with this interface.
Enter the new IP address assigned for the PCS4, the corresponding subnet mask, and gateway address, then click Submit.
The PCS4 takes approximately 2 minutes to store the new settings. After the IP address is changed, your computer loses communication with the PCS4 and a screen appears, indicating that the page cannot be displayed.
5.Close the browser.
6.After changing the PCS4 IP settings, change your computer TCP/IP settings back to their original configuration, and reboot if necessary. You are now able to access the PCS4 web pages to configure the front panel.
Using the Embedded Web Pages
The PCS4 features an embedded web server, which includes factory set web pages. These pages can be replaced with
To access the embedded web pages:
1.Launch a web browser (for example, Internet Explorer®) on your connected computer.
2.On the browser Address line, enter the PCS4 IP address. If a password has been set, the
Enter Network Password dialog box opens.
If no password has been set, the PCS4 web page opens, displaying the System Status page. Skip steps 3 and 4.
3.In the User Name field on the password window, enter text of your choice, or leave the User Name field blank.
Figure 12. Password Prompt Window
4.Enter the administrator password in the Password field, and click OK. The PCS4 web page is displayed.
NOTES: • Passwords must contain 4 to 12 alphanumeric characters. Symbols and
spaces are not allowed, and the passwords are case sensitive.
• Administrators have access to all of the web pages and are able to make changes to settings. Users can access only the System Status page.
IPL T PCS4 • HTML Configuration and Control 21
