- 22 -8VM533M-RZ Series Motherboard
English
Drive A / Drive B
The category identifies the types of floppy disk drive A or drive B that has been installed in the
computer.
None No floppy drive installed
360K, 5.25"5.25 inch PC-type standard drive; 360K byte capacity.
1.2M, 5.25"5.25 inch AT-type high-density drive; 1.2M byte capacity
(3.5 inch when 3 Mode is Enabled).
720K, 3.5"3.5 inch double-sided drive; 720K byte capacity
1.44M, 3.5"3.5 inch double-sided drive; 1.44M byte capacity.
2.88M, 3.5"3.5 inch double-sided drive; 2.88M byte capacity.
Floppy 3 Mode Support (for Japan Area)
Disabled Normal Floppy Drive. (Default value)
Drive ADrive A is 3 mode Floppy Drive.
Drive BDrive B is 3 mode Floppy Drive.
BothDrive A & B are 3 mode Floppy Drives.
Halt on
The category determines whether the computer will stop if an error is detected during power up.
No ErrorsThe system boot will not stop for any error that may be detected and you
will be prompted.
All ErrorsWhenever the BIOS detects a non-fatal error the system will be stopped.
All, But KeyboardThe system boot will not stop for a keyboard error; it will stop for all other
errors. (Default value)
All, But DisketteThe system boot will not stop for a disk error; it will stop for all other errors.
All, But Disk/KeyThe system boot will not stop for a keyboard or disk error; it will stop for all
other errors.
Memory
The category is display-only which is determined by POST (Power On Self Test) of the BIOS.
Base Memory
The POST of the BIOS will determine the amount of base (or conventional) memory installed
in the system.
The value of the base memory is typically 512K for systems with 512K memory installed on
the motherboard, or 640K for systems with 640K or more memory installed on the motherboard.
Extended Memory
The BIOS determines how much extended memory is present during the POST.
This is the amount of memory located above 1 MB in the CPU's memory address map.