CONNECTIONS
Connecting the AM and FM antennas
Both AM and FM indoor antennas are included with this unit. In general, these antennas should provide sufficient signal strength. Connect each antenna correctly to the designated terminals.
Outdoor AM antenna
Use a 5 to 10 m of vinyl- covered wire extended outdoors from a window.
AM loop antenna
(included)
Indoor FM antenna
(included)
Outdoor FM antenna
PREPARATION
| TUNER |
| GND |
| AM |
| ANT |
75Ω | FM |
UNBAL. | ANT |
AUDIO 
GND
Ground (GND terminal)
For maximum safety and minimum interference, connect the antenna GND terminal to a good earth ground. A good earth ground is a metal stake driven into moist earth.
Notes
•A properly installed outdoor antenna provides clearer reception than an indoor one. If you experience poor reception quality, an outdoor antenna may improve the quality. Consult your nearest authorized YAMAHA dealer or service center about outdoor antennas.
•If you connect an outdoor FM antenna to this unit, do not connect the indoor FM antenna to this unit.
•To minimize interference from automobile ignition, locate the antenna as far from heavy traffic as possible.
•Keep the feeder cable or coaxial cable as short as possible. Do not bundle or roll up excess cable.
•The antenna should be placed at least 2 meters from reinforced concrete walls or metal structures.
11
