Yamaha RX-397 owner manual Manual preset tuning, Press Memory on the front panel

Manual preset tuning

You can also manually store up to 40 stations (8 stations in each of the 5 groups, A1 to E8). You can then easily recall any preset stations by selecting the preset station numbers where they are stored.

									2,5
							FM/AM	l TUNING h
									PURE DIRECT	TAPE MONITOR
							EDIT	MEMORY TUNING MODE
										16
									20	12
A/B/C/D/E	1	2	3	4	5	6	7	8	VOLUME
									26	8
INPUT		BASS		TREBLE		BALANCE		LOUDNESS
PHONES	SPEAKERS								40	4
STANDBY									60	2
/ON

∞0

-dB

34

1Repeat steps 1 to 4 in “Automatic tuning” or in “Manual tuning” to tune into a station.

When you tune into a station, the frequency of the received station is shown in the front panel display.

2Press MEMORY on the front panel.

The MEMORY indicator flashes in the front panel display for approximately 5 seconds.

MEMORY	MEMORY
MAN'L/AUTO FM	Flashes

3Press A/B/C/D/E on the front panel repeatedly to select a preset station group (A to E).

The selected preset station group is shown in the front panel display.

A/B/C/D/E

FM/AM TUNING

4Press one of the preset station number buttons on the front panel to select a preset station number (1 to 8) where you want to store the station.

1 2 3 4 5 6 7 8

Note

This operation must be done within 5 seconds while the MEMORY indicator is flashing in the front panel display. Otherwise, the manual preset tuning process is automatically canceled.

5Press MEMORY on the front panel to store the station.

6Repeat steps 1 to 5 to store other stations.

Notes

•Any station data stored under a preset station number is cleared when you store a new station under that preset station number.

•The reception mode (stereo or monaural) is stored along with the station frequency.

OPERATION

23