P r e s e t N a m i n
M
2 W + 2 M A X
5.1.3Dump Out PRESET
Use this menu page to download a PRESET via the serial ports.
It is also used to immediately "copy" the settings of the various PRESETS of a MAXIDRIVE3.4 to another MAXIDRIVE3.4.
Du m 2
U
O u t P r e s e t
2 x 2 W + 2 M A X
To download a PRESET:
Use DIAL to reach the required PRESET. Press ENTER.
Note: The menu page remains unchanged to allow other PRESETS to be dumped.
All the Preset s data (name, configuration, parameter values, etc.) are immediately transmitted to the units connected to the serial ports (other MAXIDRIVE3.4, computers, etc.).
Note: In order for the transfer to have effect, the receiving units must be able to identify and accept Incoming Dump operations.
When two or more MAXIDRIVE3.4 are connected, the PRESET sent by the transmitting MAXIDRIVE3.4 (TX) overwrites (and therefore cancels) the existing PRESET in the same memory position of the receiving MAXI- DRIVE3.4 (RX).
MAXIDRIVE3.4 #1
Incoming Dump
SEND
..
Preset #2
Preset #3
Preset #4
Preset #5
Preset #6
Preset #7
Preset #8
Preset #9
..
DUMP
PORT
SERIAL
MAXIDRIVE3.4 #2
Incoming Dump
ACCEPT
..
#2 MySetup
#3 MySetup5
#4 LiveSet
Preset #5
#6 Monitor
#7 Monitor2
#8 Monitor3
#9 Side
..
DUMP
PORT
SERIAL
MAXIDRIVE3.4 #3
Incoming Dump
IGNORE
..
#2 SideField
#3 Concert1
#4 Concert2
#5 Concert3
#6 Concert4
#7 Remote1
#8 Remote2
#9 Remote2
..
5.1.4 Incoming Dump
Used to accept or ignore the Dump of a PRESET sent from another MAXIDRIVE3.4 or from a computer via serial.
Ports settings can be:
13
