Samsung VP-DC171I/XEK, VP-DC575WB/XEF Setting the File Number File No, English, Series, Reset

ENGLISH

Digital Still Camera Mode (VP-DC173(i)/DC175WB/DC175W(i)/DC575WB/DC575Wi only)

Setting the File Number (File No.)

File Number setting works only in M.Cam Mode. page 26

File Numbers are given to images in the order they were recorded when they are stored on the Memory Card.

File numbers may be set as follows:

-Series: When there are existing files, the new image will be named as the next number in the sequence.

-Reset: When there are no files stored on the Memory Card, the file numbering starts from 0001.

1. Set the [Mode] switch to [CARD].

2. Set the [Power] switch to [ (Camera)].

3.Press the [MENU] button.

The menu list will appear.

4.Move the [Joystick] up or down to select <Memory>, then press the [Joystick].

5.Move the [Joystick] up or down to select <File No.>, then press the [Joystick].

6.Move the [Joystick] up or down to select the desired option (Series or Reset), then press the [Joystick].

The selected option is applied.

7.To exit, press the [MENU] button.

Note

When you set <File No.> to <Series>, each file is assigned with a different number so as to avoid duplicating file names.

It is convenient when you want to manage your files on a PC.

4
M.Cam Mode
►Memory
Photo Quality	►Super Fine
File No.	►Series

Move OK Select MENU Exit

6
M.Cam Mode
►Memory
Photo Quality
File No.	Series
	Reset

Move OK Select MENU Exit

93