UTStarcom UT-300R2 manual Save New Settings

Chapter 4 Web-based Management 37

Figure 16 Configure LAN IP settings

To change the LAN IP Address or Subnet Mask, type in the desired values and click the Apply button. The new IP settings must be saved and the UT-300R2 must be restarted for the settings to go into effect. To manually Save & Restart the UT- 300R2, click on the Tools directory tab and then click the System menu button. Then click the Save&Restart button. The UT-300R2 will save the new IP settings and restart. Your web browser should automatically be redirected to the new IP address.

Save New Settings

Most changes that require updating the UT-300R2’s non-volatile RAM will automatically trigger a save and reboot proceedure. Any changes you have made that you want to be saved to the UT-300R2’s memory can be saved using the System Setting page, as shown below. To save settings you need to access the System menu. Click on the Tools directory tab then click the System menu button to view the menu pictured below.