Figure 12 WAN Settings - Dynamic IP Address (DHCP)
1From the WAN Setting page, select the PVC you want to configure from the seven available PVCs, using the drop- down menu.
2You can also specify the VPI/VCI numbers (assigned to this PVC by your ISP) that will be used to uniquely identify this PVC to your ISP. You can also enter of modify these two numbers later during the configuration process.
3Click the Add button, at the bottom of the page, to add the new configuration to the list of active PVCs. This will open the WAN Setting configuration screen, shown above.
4Click to select the DHCP radio button listed in the Connection Type options list. The menu will change to offer a different set of configuration options and will appear as shown above when DHCP is selected.
5If you are instructed to use enable Default Route by your ISP, click the Enabled radio button. This setting specifies that this PVC (from the list of seven) on your UT-300R2 be used to define the default route to the Internet for your LAN.
