UTStarcom UT-300R2 manual Set up Proxy Service, Configure IP Settings on Your PC

14 Chapter 3 Before Configuring UT-300R2

Note: If Internet Protocol (TCP/IP) does not display as an installed component, you must install it.

Set up Proxy Service

In Windows Internet Explorer, you can check if a proxy server is enabled using the following procedure:

1Click on the START button, go to Settings and choose Control Panel.

2In the Control Panel window, double-click on the Internet Options icon

3Click the Connections tab and click on the LAN Settings button.

4Verify that the “Use proxy server” option is NOT checked. If it is checked, click in the checked box to deselect the option and click OK.

Configure IP Settings on Your PC

To use the web-based management software, launch your web browser software and use the LAN IP address of the UT-300R2 to access the management software. The default LAN IP address of the UT-300R2 is used in the Address bar of your web browser window. Type in http:// followed by the default IP address, 192.168.1.1 in the address bar of the browser. The URL in the address bar should read: http://192.168.1.1