Chapter 4 Web-based Management 25
Figure 11 WAN Settings Menu – Routed/Bridged Mode
Note: Please note that the menu shown above will change
depending on which WAN Type and Connection Type you select.
1Click to select the RFC2684Bridged radio button in the WAN Type options list if your ISP uses DHCP to assign you an IP address that is valid on the WAN (Internet). This is the most common type of bridged connection offered by ISPs.
2Also under the VPI/VCI, you will need to enter two numbers, the VCI and VPI values. These numbers are used to define a unique path for your connection. Your ISP should give you the specific settings for the VPI and VCI numbers to enter. Type in the correct values assigned by your ISP.
