UTStarcom UT-300R2 manual Dhcp Server Settings for the LAN

Chapter 4 Web-based Management 33

Figure 14 Configure DHCP server settings for the LAN

The three options for DHCP service are as follows:

1You may use the UT-300R2 as a DHCP server for your LAN.

2You can disable DHCP service and manually configure IP settings for all workstations.

You will use a DHCP service provided by your ISP, in which case DHCP should be disabled on the UT-300R2.

DHCP Server Settings for the LAN

The default setting of UT-300R2 's DHCP server is disabled. While you click to select the Enabled radio button under the DHCP Server option, the device will become the default gateway for DHCP clients that connected to it. When the UT- 300R2 is used for DHCP it becomes the default gateway for DHCP client connected to it. Keep in mind that if you change