10 Chapter 2 Installation Planning

Figure 5 Hub/Switch to UT-300R2 Connection

If you wish to reserve the uplink port on the switch or hub for another device, connect to any on the other MDI-X ports (1x, 2x, etc.) with a crossed cable.

Power on

1To power on the UT-300R2, please follow the steps as instructed:

2Insert the AC Power Adapter cord into the power receptacle located on the rear panel of the UT-300R2 and plug the adapter into a suitable nearby power source.

Page 14
Image 14
UTStarcom UT-300R2 manual Power on