Furuno FAR-2167DS How to hoist the antenna unit, Attachment of lifting fixtures, collar and ropes

How to hoist the antenna unit

1.Fix the antenna radiator to the antenna unit chassis as shown on page 1-3.

2.Attach the lifting fixtures and collars as shown below.

3.Position the radiator as shown below and arrange the ropes A and B.

Lifting fixture		Supplied as accessories.
Collar		Remove after installation.
Spring washer
	Spring washer

Hex bolt (M12x20)

Flat washer (M12) (Torque: 63.5 Nm)

Lifting hook (2 pcs.)

Remove lifting fixture, coat threads of hex bolts with silicone grease, and then insert bolts in antenna chassis.

	*	B 1.8m
A 2m

*

* 2. Place protective material (cardboard, foam, etc.) between rope and radiator at the asterisk-marked locations, to prevent damage to radiator.

Attachment of lifting fixtures, collar and ropes

1-4