Kyocera FS-6700 manual Capacity of the memory card is insufficient. This error

Chapter 5 Troubleshooting

Message	Corrective Action
	09: The capacity of the memory card is insufficient. This error
	code appears when an attempt is made to write more data on the
	memory card than available memory. To halt the writing of data,
	first stop data transmissions from the computer, and then the
	printer’s CONTINUE key. Press the FORM FEED key if the
	message Waiting will appear in the message display. The
	message display will return to reading Ready.
	11: The memory card is full of data items. The number of data
	items which can be written on the memory card is limited to 127.
	Pressing the CONTINUE key will restore the message Ready in
	the message display.
	13: This is a logical error. Try substituting another flash memory
	card.
	17: The flash memory card cannot be written due to insufficient
	printer memory. Either delete unnecessary macros and/or fonts
	stored in the printer, or expand the printer’s available memory.
	18: This is a write error. Try substituting another flash memory
	card. (Error codes 13 through 18 apply only to flash memory
	cards.)
>Read fonts	The amount of memory available for the fonts header parts of
Failed	font is too small to load more fonts. Try deleting unnecessary
	fonts and macros.
I/F occupied	This message is displayed when you attempt to use the printer’s
	control panel to change the environmental settings on the
	interface from which data are presently being received.

5-17