Kyocera FS-6700 manual Maintenance Messages Corrective Action

Chapter 5 Troubleshooting

Maintenance Messages

Table 5.2 Maintenance Messages

Message	Corrective Action
Top cover	Open the top cover, then close tightly.
Open
Side cover	Open the side cover, then close tightly.
Open
Paper feed unit	Open the paper feed unit, then close tightly.
Open
Face-down tray	The face-down tray has become full. Remove all pages from the
paper full	face-down tray. The face-down tray can hold up to 350 pages.
Add paper	Add paper to the paper cassette or multi-purpose tray.
Cassette	The cassette is not closed securely, close it tightly.
not loaded
Cassette	The size set for the paper cassette is incorrect. Be sure to
size error	correctly set the paper guides and paper stopper inside the
	cassette to match the paper size being used. See Section 1.4.
Set paper	Add a sheet of paper to the multi-purpose tray (manual mode),
Press CONTINUE	and press the CONTINUE key.
Load paper	The paper size does not match. The size of the paper in the
(paper size)	cassette is different to the size specified by the application
	software or by PRESCRIBE IIe. Either put paper of the specified
	size into the cassette. See Section 1.4.
	If the CONTINUE key is pressed, printing will be resumed.
	However, if more than one sheet is to be printed, the same
	message will again be displayed from the second sheet onward.
	You can abandon printing by pressing the CANCEL key.

5-11