Kyocera FS-6700 manual Resource Protection

Chapter 2 Operating the Laser Printer

2.11. Resource Protection

When you switch from the HP LaserJet 5M emulation to another, all downloaded fonts and macros are lost. Resource protection preserves these PCL resources in memory so that they are intact when you change the emulation back to HP LaserJet 5M.

By using the printer’s >Resource prot., you can select from two resource protection modes as follows:

>Resource prot. Permanent

In this mode, the printer stores fonts, macros, symbol sets, etc. in memory that were downloaded as permanent PCL resources. All temporary resources are lost when the emulation mode is changed from HP LaserJet 5M to another or vice versa.

>Resource prot.

Perm / Temp

In this mode, the printer stores both permanent and temporary resources when the emulation mode is changed from HP LaserJet 5M to another or vice versa.

Note

The printer requires 10 MB or more of memory in order to set resource protection. (14 MB or more is required when a DU-25 duplexer is installed.)

2-35