Kyocera FS-6700 manual Control Keys, Key Function

Chapter 2 Operating the Laser Printer

Control Keys

The control panel keys are used to configure the printer.

Note

Settings made with these keys effect only the interface currently in use.

Key		Function
ON LINE	Switches the printer on-line and off-line.
CONTINUE	1. Depending on the message being indicated, there are cases where operation will
	continue after pressing the CONTINUE key. If such a message is displayed, operation
	will be resumed after pressing this key. (See Table 5.3)
	2. Used as the	key in the mode selection function.
STACK	1. Selects whether printed pages are delivered to the face-down or face-up tray.
	The optional face-up output tray is required to output pages face-up. (See page 1-23.)
	2. Lets you access the desired item or enter numeric values. In some of the control

+procedures, the (CONTINUE) and (FORM FEED) keys are used to enter or exit the sub items.

FORM FEED	1. Prints and feeds out one page.
	2. Used as the key in the mode selection function.
	1. Abandons a printing job, resets numeric values, or cancels a setting procedure.
	2. Turns off the buzzer when the buzzer sounds.
CANCEL
EXIT	1. When pressed during mode selection, terminates the setting and returns to the Ready
	condition.
	2. Used to select the emulation, font, character code set; to read an memory card; to
MODE
	select the automatic cassette mode; and others (See the last page in this manual.).

(Continued on next page)

2-7