Kyocera FS-6700 manual Emulation Selection, KC-GL Emulation, DisplayDescription

Chapter 2 Operating the Laser Printer

2.5. Emulation Selection

The following emulations can be selected for this printer. The emulation selected is stored even while the printer’s power is off.

Line printer

IBM Proprinter

Diablo 630

Epson LQ-850

HP LaserJet 5M (Default setting)

KPDL

KC-GL

KC-GL Emulation

The following settings can be made from the sub-menu when KC-GL emulation is selected.

DisplayDescription

>KC-GL Pen width The width of pens (1) through (8) can be set in 1-dot increments from 01 to 99. After selecting the pen on this sub-menu, you can also display and select the width set for that pen on a lower menu.

>KC-GL Page set Any of the following page sizes can be set: A2, A1, A0, B3, B2, B1, B0, SPSZ (custom size specified using the SPSZ command). The selected page size will be automatically reduced to the actual paper size being used.

2-25