Appendix B Paper Selection

Paper Specifications

The following table summarizes the basic paper specifications. Details are given on the following pages.

Table B.1. Paper Specifications

Weight

60 to 90 g/m2 (16 to 24 lbs./ream)

Thickness

0.086 to 0.110 mm (3.4 to 4.3 mils)

Dimensional accuracy

±0.7 mm (±0.0276 inches)

Squareness of corners

90° ±0.2°

Moisture content

4% to 6%

Pulp content

80% or more

 

 

Note

When using paper thinner than 64 g/m2 or thicker than 90 g/m2 with this printer, be sure to make the proper setting (given below) for that paper on the Paper type menu found on the Mode Select Menu.

Thin: Paper 64 g/m2 or less

Normal: 64 to 90 g/m2

Thick: 90 g/m2 or more

Extra thick: OHP sheets, postcards, or other special paper.

Note that depending on the properties of the paper the appropriate mode may differ from that given above. Use the setting that gives the best print quality.

Kyocera bears absolutely no responsibility for accidents resulting from the use of inappropriate paper which does not meet the specifications listed above. For paper, contact the licensed dealer of Kyocera from which you purchased the printer.

B-3

Page 188
Image 188
Kyocera FS-6700 manual Table B.1. Paper Specifications