Kyocera FS-6700 manual Mode Selection Menu List, Menu Description Default Setting

Chapter 2 Operating the Laser Printer

2.3. Mode Selection Menu

This section explains the menu hierarchy used for all menus which can be set and selected using the MODE key. The MODE key can be used to display all of the menus in the table below. This mode selection menu conforms to the menu hierarchy given at the end of this manual.

Pressing the MODE key initially displays menus at the top of the hierarchy.

Use the + and –keys to move between menus in the same level. The + key shows the next menu, while the –key shows the previous one. Change levels by using the and keys. The key moves to lower levels (sub-menus), while the key moves to higher levels.

Mode Selection Menu List

Menu	Description	Default Setting
Interface >	Selects the interface for which settings are to be made.	Parallel
	Settings from the mode select menu are applied to the
	interface selected here.
	Parallel setting has a sub item in which one of four	Nibble (high)
	data transmission modes can be selected — Nibble
	(high), Auto, Normal, or High speed
	Serial setting has five sub items, and sets the
	following RS-232C/RS-422A parameters:
	Baud rate	9600
	Data bit	8
	Stop bit	1
	Parity	None
	Protocol	DTR (pos.) &
		XON
Number of copies Set the number of copies to be printed. This can be set		001
	up to 999.

(Continued on next page)

2-21