Kyocera FS-6700 Memory Expansion Installation, Printing condition Resolution 300 dpi 600 dpi

1.7.

1.7. Memory Expansion Installation

In this section is explained how to expand the printer’s memory. Expanded printer memory enables you to print more complex pages, download more fonts, and define more macros.

It begins by explaining how to remove the main circuit board from the printer, and explains how to install a SIMM (single in-line memory module) on the main circuit board.

Note

The expansion memory should be installed only by a Kyocera authorized dealer or Kyocera certified technician. Kyocera shall not be liable for damage due to improper installation of the expansion memory.

The minimum memory requirements for the printer with various options installed are listed in the table below. Please refer to this table when expanding the printer’s memory.

Printing condition	Resolution
	300 dpi	600 dpi
HP LaserJet 5M/KPDL	4 MB	4 MB
HP LaserJet 5M/KPDL, duplex mode* = on	4 MB	6 MB
HP LaserJet 5M/KPDL, resource protection,	–	10 MB
duplex mode = None,
HP LaserJet 5M/KPDL, resource protection,	–	14 MB
duplex mode*= on,

* An optional duplex unit (DU-25) is required for duplex printing.

Note

When printing on paper larger than A4 size, it may be necessary to extend memory depending on the size of data to be printed.

1-40